1956 Ford Pickup

We installed power windows and replaced the weather stripping on this 1956 Ford Pickup. We’re also going to install some new springs for the suspension and fix a coolant leak on the engine.

1953 Studebaker Champion

We added a serpentine system to the engine, which involved upgrading the pulleys, the air conditioning system, and the power steering system. We’re also rebuilding the front suspension.

1951 Chevy Truck

The owner of this truck originally wanted Full Scale to do the work, but we didn’t have the capacity at the time to take the project on. The owner ended up having someone else build the truck for him, and brought it in to us later on to improve upon a few things, including the gauges and wiring under the …

1955 Chevy

The owner of this 1955 Chevy has owned it since 1978, buying it right out of high school. It’s an original 4-door 150 sedan with the original 6-cylinder engine in it. In the past, we’ve done a disc brake and wiper conversion. This time around, we’re flushing the cooling system and rebuilding the carburetor. We’re also having the water pump …

1950 Chevy

This 1950 Chevy is in the shop to have some new brake lines installed. The owner of this drag car has been building it for the past 25 years. We’re also going to be fitting the windows to the fiberglass doors. Currently the doors are just bare shells, so we need to install the internal door components to get the …

1958 Ford

This 1958 Ford straight-axle gasser is running and driving. We’re going to do some metal work, including re-arching the rear wheel openings. We’re going to put a set of seats in it and also build a roll cage for it. The owner is hoping to take it to the strip and run under 10 seconds, so we look up the …

1957 Chevy Bel Air

We’ve done a lot of work on this 1957 Chevy Bel Air in the past. The vintage air conditioning system that was originally in the car had stopped working, so we were tasked with figuring out why it stopped working. The culprit was a controller that was on the fritz, so we took the system apart apart and replaced the …

1957 Jeep Jeepster

This 1957 Jeep Jeepster sits on a Corvette chassis. The owner was experiencing some electrical issues, so we put the dash back together and fixed some wiring. We’ve worked on this car off and on over the past 15 years. We put the bumpers on it years ago before it was even painted. Take a look at our 1957 Jeep …

1953 Ford F100 Pickup

This truck belongs to Darrel Struth. We did a lot of work on this truck about 6-7 years ago. Now we’re putting an overdrive transmission in it. We’re taking out the C4 3-Speed that we put in it when we put in the motor and drive line in it years ago There’s lots of body mods, widened the bed back …

1951 GMC Pickup Truck

This 1951 GMC Pickup Truck as been in the owner’s family a long time. Originally it was his fathers car. Another shop had dome some work on the front end about 6 months ago, and recently the front end fell apart. Some cotter keys weren’t installed and some bolts backed out, which ended up dropping a front wheel in his …